Yields
How much does it cost to cut a ham? You’d be better off asking.
Almost every customer starts with the same question: how much does it cost to cut the ham? It’s only natural, and I would ask it too. But there’s another question that almost no one asks, and it matters much more: how much of the ham will I get back, and in what condition?
A good piece can cost €180, €250, €400, or much more. Saving ten euros on the cutting service seems like a bargain until you realize that what’s on the table is often worth many times more than the service itself. What’s at stake isn’t those ten euros. It’s the whole ham.
A good cut begins before the knife touches the ham
What turns out well is decided long before the first slice. It depends on the piece selected, the temperature at which it’s worked, and the environment in which it’s prepared. A ham that has been mishandled before cutting cannot be fixed afterward, not even by the best knife in the world.
And when the time finally comes to use the knife, every detail counts:
- The knife. Sharp, well-maintained, and suited to each area of the piece. A poor knife tears; a good one makes clean cuts.
- The materials. Knives, cutting boards, supports, sharpening. All of that costs money, and someone has to pay for it.
- The skill. The experience of the person cutting shows in every slice.
- The judgment. Whether or not to respect the piece, and to keep the slices consistent from start to finish.
Rushing leads to waste and loss of flavor
Cutting too quickly costs you. Product that could have been properly utilized is wasted, the slices lose their stability and break, and the flavor suffers too, because a mishandled slice does not taste like a properly cut one. Anyone who has tried it can tell.
Then comes the arrangement. If the slices are packed in haphazardly, the package ends up being a jumbled mess rather than a product that is a pleasure to open. And if the ham passes through four sets of hands—one to cut, another to arrange, another to package—no one takes responsibility for anything.
Packaging is also part of the product
An excellent ham can be ruined at the very last step. The tray on which the packages are prepared, the quality of the package, and the plastic covering it all matter. Cheap, poor-quality packaging spoils the product, and there is no excuse for that. The vacuum machine matters too: a professional vacuum sealer preserves the ham as it should be, and you can tell by the flavor, the appearance, and how long the piece lasts.
Price matters, but yield matters more
Imagine two establishments. One charges very little to cut the ham, while the other charges more. At first glance, the first seems like the better deal. But there is missing information:
- How many grams of sliced ham does each one deliver?
- How much is turned into cubes?
- How much is lost during cleaning?
- Do they return all the usable parts?
- Do the packages actually weigh what they say?
- How do they store the product?
- Who cut it, and with what materials and what packaging?
When you consider all of this, the calculation can turn around. A cheap cut ends up costing you if product is left behind along the way. And a job well done more than makes up for the difference when what is on the cutting board is a ham worth several hundred euros.
That is why at El Corte de Espín we talk about yield
I have had a knife in my hand for more than twenty-five years. With that experience, we have prepared a reference guide so you can know what to expect based on the weight of your piece.
Ham yield
| Weight of the piece | 100 g packages | In addition |
|---|---|---|
| 7 – 7.5 kg | 29 | cubes + bone |
| 7.5 – 8 kg | 32 | cubes + bone |
| 8 – 8.5 kg | 35 | cubes + bone |
| 8.5 – 9 kg | 38 | cubes + bone |
| 9 kg | 41 | cubes + bone |
Paleta yield
| Weight of the piece | 100 g packages | In addition |
|---|---|---|
| 4 – 4.5 kg | 15 | cubes + bone |
| 4.5 – 5 kg | 17 | cubes + bone |
| 5 – 5.5 kg | 20 | cubes + bone |
| 5.5 – 6 kg | 22 | cubes + bone |
| 6 – 6.5 kg | 24 | cubes + bone |
| 6.5 – 7 kg | 26 | cubes + bone |
These are estimates. Every piece is unique, and the fat content, shape, curing process, or size of the bone can affect the result. That is precisely why I believe customers deserve a reference before handing over their piece, not a surprise afterward.
A fair price, but not below the value of the work
Our price is very competitive for the level of service, the experience that backs it up, the selection of the pieces, and the knives and materials we use. We cannot lower it any further. Maintaining this level costs money, and a price below market value can only be sustained by cutting corners somewhere: in yield, materials, packaging, or the care of the piece.
That is why, when someone offers a price that doesn’t add up, it is worth asking where the difference comes from. Sometimes it is low yield. Sometimes it is a product that is not what you expected. And in the worst-case scenario, the ham you get back is not the one you handed over. There are too many details to leave to chance, and that is why the most sensible thing to do is take your piece to a place you can trust completely.
The ham belongs to you
That is how I understand this trade. The ham that comes into our facilities does not belong to us; it belongs to the customer. My job is to take care of it, work it properly, and return everything the piece has to offer: slices, cubes, and bones. Transparency about yield is part of the service.
Show, don’t hide
We want to be more and more transparent: weighing the pieces, monitoring yields, counting the packages, recording the results, and showing real examples. The best way to demonstrate our value is not to say that we are better, but to show it. Ham by ham, weight by weight, package by package.
The customers we want to work with
I say this with the utmost respect. We want customers who value a job well done, who are willing to pay for it, and who respect what we do. We select our customers just as we select our hams. If you want us to cut your piece, you may have to wait your turn, because we prefer to work well rather than work quickly.
Before choosing where to have your ham cut
Compare prices, of course. But also compare yield, utilization, materials, packaging, professionalism, and service. And above all, take your ham somewhere you trust, where you know you will not be misled and where you can enjoy the piece from start to finish.
Because if what you are looking for is to enjoy your ham, there is no other option.
Don’t just compare how much it costs to cut your ham.
Compare how much ham you get back.
El Corte de Espín
Professional cutting. Utilization. Transparency.

